K&N Airfilter 2011 Compass Install w/Photos
Posted: Sun Apr 19, 2015 3:07 pm
Disclaimer! Warning this is to be used as a guide and I will not be held responsible if anything goes wrong or you break anything. DO THIS AT YOUR OWN RISK!
I thought i'd share some photos of the install process.
Step 1:
Turn the two tabs to you can remove the first part of the intake.
Step 2:
You have to remove 6 screws all around the air intake box and one bolt that is attached to the strut tower (see red arrows for more details)
Step 3:
Remove the stock air filter. All you have to do is just pull the filter out.
Here's a photo of the K&N box
Here's a photo of the K&N Filter and the stock filter side by side.
Step 4: Install the K&N filter. and thats it! Put everything back together
and thats it!
more info about gas mileage and power in the coming week or so.
I thought i'd share some photos of the install process.
Step 1:
Turn the two tabs to you can remove the first part of the intake.
Step 2:
You have to remove 6 screws all around the air intake box and one bolt that is attached to the strut tower (see red arrows for more details)
Step 3:
Remove the stock air filter. All you have to do is just pull the filter out.
Here's a photo of the K&N box
Here's a photo of the K&N Filter and the stock filter side by side.
Step 4: Install the K&N filter. and thats it! Put everything back together
and thats it!
more info about gas mileage and power in the coming week or so.