Disclaimer! Warning this is to be used as a guide and I will not be held responsible if anything goes wrong or you break anything. DO THIS AT YOUR OWN RISK!
I thought i'd share some photos of the install process.
Step 1:
Turn the two tabs to you can remove the first part of the intake.
Step 2:
You have to remove 6 screws all around the air intake box and one bolt that is attached to the strut tower (see red arrows for more details)
Step 3:
Remove the stock air filter. All you have to do is just pull the filter out.
Here's a photo of the K&N box
Here's a photo of the K&N Filter and the stock filter side by side.
Step 4: Install the K&N filter. and thats it! Put everything back together
and thats it!
more info about gas mileage and power in the coming week or so.
K&N Airfilter 2011 Compass Install w/Photos
-
- Site Admin
- Posts: 388
- Joined: Sun Oct 05, 2014 9:29 pm
- Status: Offline
K&N Airfilter 2011 Compass Install w/Photos
---
South Hawk Computing LLC Owner
Any advice / recommendations given on this forum should ONLY be preformed at the user's own risk. South Hawk LLC does not offer any guarantees or warranties when a user attempts to try these fixes on their own. We are NOT responsible for any damages that may or may not occur to your devices.
South Hawk Computing LLC Owner
Any advice / recommendations given on this forum should ONLY be preformed at the user's own risk. South Hawk LLC does not offer any guarantees or warranties when a user attempts to try these fixes on their own. We are NOT responsible for any damages that may or may not occur to your devices.