This is a Tech Tip in how to make a 5Ghz wireless bridge to 2.4Ghz Access Point with the Shibby Tomato firmware and a Cisco E3000 router.
Tech Tip: 5Ghz wireless bridge to 2.4Ghz Access Point Shibby Tomato Firmware
-
southhawkct
- Site Admin
- Posts: 388
- Joined: Sun Oct 05, 2014 9:29 pm
- Status: Offline
Tech Tip: 5Ghz wireless bridge to 2.4Ghz Access Point Shibby Tomato Firmware
---
South Hawk Computing LLC Owner
Any advice / recommendations given on this forum should ONLY be preformed at the user's own risk. South Hawk LLC does not offer any guarantees or warranties when a user attempts to try these fixes on their own. We are NOT responsible for any damages that may or may not occur to your devices.
South Hawk Computing LLC Owner
Any advice / recommendations given on this forum should ONLY be preformed at the user's own risk. South Hawk LLC does not offer any guarantees or warranties when a user attempts to try these fixes on their own. We are NOT responsible for any damages that may or may not occur to your devices.