Installed a CAI for a 2001 Ford Mustang GT Bullitt
Posted: Wed Apr 22, 2015 3:00 pm
Disclaimer! Warning this is to be used as a guide and I will not be held responsible if anything goes wrong or you break anything. DO THIS AT YOUR OWN RISK!
This install was done on 3/5/2002 and purchased from
http://www.densecharger.com
Product Name: Densecharger 100mm
Total Install time: 1.5 hours
Step one:
I took a Pic of the previous air flow step up i had. It was a K&N air Filter with the air silencer removed.
Step two:
Here I removed the Stock Air Box.
Step three:
I basically had to take the whole instake system apart. There wasn't any room to do anything. I highly suggest you do the same if you were going to install one.
Final Pics: Its all done and ready to go
This install was done on 3/5/2002 and purchased from
http://www.densecharger.com
Product Name: Densecharger 100mm
Total Install time: 1.5 hours
Step one:
I took a Pic of the previous air flow step up i had. It was a K&N air Filter with the air silencer removed.
Step two:
Here I removed the Stock Air Box.
Step three:
I basically had to take the whole instake system apart. There wasn't any room to do anything. I highly suggest you do the same if you were going to install one.
Final Pics: Its all done and ready to go