Installing Stock GT fog lights on a 2001 Ford Mustang GT Bullitt
Posted: Wed Apr 22, 2015 2:50 pm
Disclaimer! Warning this is to be used as a guide and I will not be held responsible if anything goes wrong or you break anything. DO THIS AT YOUR OWN RISK!
Installing Stock GT fog lights on a 2001 Ford Mustang GT Bullitt
Total Install time: 2.2 Hours
Step one:
Here's what the inside of our bumper looks like. There are 3 spots where you have to screw your foglight into.
Step two:
Bullitts already have the wiring for fog lights just look up inside the front bumper. You'll see this.
Here's the fog lights that i ordered.
Ford Part numbers for the Fog lights are:
XR3Z-15200-AA
XR3Z-15200-BA
Step three:
Here are the 3 point were the screws need to go into.
Step Four:
The Nuts and bolts that i used to put the foglights in.
Step Five:
Next I install the Fog light switch. Ford part number: 1R3Z-15A214-AA
Step Six:
The Final Product!
Installing Stock GT fog lights on a 2001 Ford Mustang GT Bullitt
Total Install time: 2.2 Hours
Step one:
Here's what the inside of our bumper looks like. There are 3 spots where you have to screw your foglight into.
Step two:
Bullitts already have the wiring for fog lights just look up inside the front bumper. You'll see this.
Here's the fog lights that i ordered.
Ford Part numbers for the Fog lights are:
XR3Z-15200-AA
XR3Z-15200-BA
Step three:
Here are the 3 point were the screws need to go into.
Step Four:
The Nuts and bolts that i used to put the foglights in.
Step Five:
Next I install the Fog light switch. Ford part number: 1R3Z-15A214-AA
Step Six:
The Final Product!